Graph-tech Ghost User Manual download pdf (Page 59)

Solder the Output Jack Harness (red, white, blue, two blacks) to

the supplied Stereo Switched Output Jack, cutting the wires to

a reasonable length for your installation. The second black wire

can go to the same lug as the rst, or be used as a bridge ground

if necessary. Remove the guitar’s 1/4” jack and replace it with

the Stereo Switched Jack, using the nuts and washers supplied.

Stereo Switched Output Jack

Acousti-phonic

TIP

RING

Ring

Sleeve

Tip

Switch

Spare Ground

Black goes to the sleeve contact, Red to the Ring, Blue to

the Tip, and White to the Switch contact, which shorts to

the Tip contact when the plug is withdrawn from the 1/4”

jack. When the plug is inserted in the jack, these contacts

separate, and power is supplied to the Acousti-Phonic and

any other device powered by the red Auxiliary Power lead.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 75 76

No comments

Graph-tech Ghost User Manual Page 59