Graph-tech Ghost User Manual download pdf (Page 62)

A battery is required to power the Acousti-Phonic. The magnetic

signal has to go through the Acousti-Phonic for blending purposes,

so if the battery is removed or dead, there will be no output from

the 1/4” jack, not even magnetic pickups. In normal use this

battery lasts 500 hours, which means changing it twice a year

will ensure that it never goes dead. Always unplug the cable from

the 1/4” jack to conserve battery life when not using the guitar.

Connect the Battery Clip Harness (red, black, a short

red) to the battery and insert the battery into the metal

holder. Locate the battery along the side or back wall of

the control cavity, or on the cavity cover plate. Make sure

the wiring harness will reach the Acousti-Phonic, then

peel and stick the Battery Holder to the chosen location.

The Acousti-Phonic is designed to operate on 9v or 18v, and

the same batteries that power it can also power active pickups

or another on-board device by using the short, red Auxiliary

Power Lead. Ground the active magnetic pickups using any of

Battery Power

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 75 76

No comments

Graph-tech Ghost User Manual Page 62