Graph-tech Ghost User Manual download pdf (Page 56)

Locate the Acousti-Phonic where it can accept plug-in connections

from the 1/4” jack, the saddle pickups, the battery, and options if

applicable. Attach it, using the self adhesive foam tape on the back, to

the side or back of the control cavity or to the inside of the cover plate.

Acousti-Phonic

Acoustic volume and magnetic input

The Basic Acousti-Phonic does not include a volume pot, but

instead a wiring harness is provided to convert one of your tone

controls into the Acoustic Volume Pot. (The Advanced Kit includes

the Acoustic Volume with Mid/Dark Switch complete with harness,

or you can order it as a separate item) The pot you convert should

be either 250k or 500k to work properly with the Acousti-Phonic.

(If you would like to operate the Acousti-Phonic without a volume

pot, you can install the wiring harness only and get acoustic

output always at full volume. Solder the purple and yellow

wires together, and coil up the black wire and leave it unused.)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 75 76

No comments

Graph-tech Ghost User Manual Page 56